PART  LISTS FOR MAKING IR TRANSMITTER AND RECEIVER:

TRANSMITTER: 
- 3 pcs. 68 ohm 1/4 W resistor 
- 2 pcs. 4,7 K 1/4 W resistor 
- 1 pc. 10 Mohm 1/4 W resistor 
- 1 pc. 455 kHz resonator 
- 2 pcs. SMD 0,1 pF capacitor 
- 1 pc. 220 uF / 10V capacitor 
- 10 pcs. small signal diode (BAV103) 
- 1 pc. dia. 3 mm red led 
- 2 pcs. infra-red diode, TSUS5402 or LD271 (check the wave length) 
- 1 pc. Holtek HT12A encoder 
- 2 pc. NPN BC368 transistor 
- 1 pc. Litium battery CR2032 / battery holder 
- 7 pcs. small board momentary push buttons (temporarily on) 
- 1 pc. app. 120x70x20 mm board case 


RECEIVER: 
- 1 pc. 110 ohm 1/4 W resistor 
- 7 pcs. 8,2 K 1/4 W resistor 
- 4 pcs. 220 ohm 1/4 W resistor 
- 1 pc. 47 K or 51,1 K 1 % 1/4 W resistor 
- 2 pcs. SMD 0,1 uF capacitor 
- 1 pc. 220 uF / 16V capacitor 
- 1 pc. 110 uF / 25V capacitor 
- 1 pc. dia. 3 mm red led 
- 1 pc. infra-red sensor, TFMS5360 or TSOP17XX (check the wave length) 
- 1 pc. Holtek HT12D decoder 
- 2 pcs. NPN BC547 transistor 
- 4 pcs. PNP BC557A transistor 
- 4 pcs. 4N26 optocoupler 
- 1 pcs. 7805 power regulator chip 
- 1 pc. 9V battery 
- 1 pc. app. 120x70x40 mm board case